ico-phone +1 (833) 975-7587
Store logo
Verkada

Verkada WH32 Fire & Intrusion Detectors Repeater/Hub, 160 sensors, 1200 mAh, 24 hours backup, 10-36V DC, 300 ft range

SKU: 

WH32-HW

Verkada WH32-HW extends VLink sensor coverage and can also serve as a hub when wired via RS-485. Built for Verkada’s cloud-managed alarm ecosystem, it closes wireless gaps without extra cabling, supports up to 160 sensors in hub mode, and lets teams monitor activity, connection quality, battery level, and device status in Command.
Prices could not be updated.
Description
ico-plus ico-minus
The Verkada WH32 is a cloud-managed wireless repeater and hub designed for security installers and IT teams deploying fire and intrusion detection systems across commercial, education, retail, and warehouse environments. It operates in two modes: as a VLink sub-GHz repeater to extend coverage up to 2000 ft (open field, line of sight) from an upstream hub without additional cabling, or as a VLink hub in RS-485 wired mode supporting up to 160 wireless sensors. A built-in 1200 mAh backup battery sustains operation for up to 24 hours during power outages, while tamper detection and certifications including FCC, IC, RCM, CE, and UL/cUL reinforce enterprise-grade reliability. The compact 5.5 x 5.5 x 1.3 in enclosure mounts to walls or ceilings and ships with all required hardware, simplifying deployment across multi-site installations. A 10-year warranty underscores long-term investment confidence.
Documents
ico-plus ico-minus
FAQs
ico-plus ico-minus
What are the two operating modes of the Verkada WH32, and how does each connect to the rest of the alarm system?
The Verkada WH32 operates either as a VLink sub-GHz repeater, powered via a 10–36 V DC terminal block and communicating wirelessly with an upstream VLink hub, or as an RS-485 hub, receiving power and data through an RS-485 input connection to the panel.
How many wireless sensors can the Verkada WH32 support when configured in hub mode?
In hub mode the WH32 supports up to 160 Verkada wireless sensors, and Verkada recommends no more than 6 repeaters per hub.
What backup power does the Verkada WH32 provide if mains power is lost?
The WH32 has a built-in 1200 mAh battery that provides up to 24 hours of backup during a power outage under typical use conditions.
What is the wireless range of the Verkada WH32 in repeater mode, and what environments affect that figure?
In repeater mode the WH32 reaches up to 300 ft to an upstream VLink hub in open-field, line-of-sight conditions; the product data notes that range will be reduced indoors depending on the environment.
What are the environmental and physical installation requirements for the Verkada WH32?
The WH32 operates within a temperature range of 32 to 122 °F and a humidity range of 0–90% RH non-condensing, fits a 5.5 x 5.5 x 1.3 in footprint, and can be mounted on a wall or ceiling using the included mount plate, T10 security Torx screwdriver, 4 wall screws, and 4 wall anchors.
What certifications does the Verkada WH32 carry, and what warranty does it come with?
The WH32 holds FCC, IC, RCM, CE, UL/cUL, and IEC 62368-1 certifications and is backed by a 10-year warranty.