ico-phone +1 (833) 353-8282
Store logo
Tripp-Lite

Tripp Lite by Eaton SmartPro 750VA Tower UPS - 240 V AC

SKU: 

SMX750SLT

Line-interactive UPS, Tripp Lite by Eaton SmartPro, Input 220 V AC, Output 240 V AC, Tower
ico-puzzle-piece-02 This product is compatible with...
Prices could not be updated.
Description
ico-plus ico-minus
Products and parts from Tripp-Lite.
Technical Specifications
ico-plus ico-minus
Technical Information
Receptacle Detail 6
Dataline Protection RJ-45
Transfer Time 8 ms
Power Description
Load Capacity (VA) 750 VA
Load Capacity (Watt) 500 W
Input Voltage 220 V AC
Output Voltage 240 V AC
Management
Network Management SNMP Manageable
Interfaces/Ports
Serial Port Yes
USB Yes
Battery Information
Backup/Run Time (Full Load) 7 Minute
Backup/Run Time (Half Load) 20 Minute
Typical Battery Recharge Time 8 Hour
Hot Swappable Yes
Physical Characteristics
Height 10.3"
Width 6.8"
Depth 13.3"
Form Factor Tower
Weight (Approximate) 34.10 lb
Miscellaneous
Package Contents
  • SmartPro 750VA Tower UPS
  • SMX750SLT UPS System
  • PowerAlert Software CD-ROM
  • USB and serial cabling
  • User manual with warranty information
Additional Information
  • Switches: Yes, includes 2 front panel mounted switches, power on switch, powers UPS on in AC or battery mode when pressed longer than one second. Power on switch also initiates self test when pressed longer than .5 seconds as the UPS is in line power mode. Also serves as an alarm silence when pressed for longer than .5 seconds in battery mode. Power off switch, turns UPS off when pressed and held for longer than 1 second
  • Low voltage transfer to battery power: Switches to battery power as line voltage decreases to 151 (220V) / 158 (230V) / 165 (240V) volts or less. Resets back to line power mode as line voltage increases to 159 (220V) / 166 (230V) / 173 (240V) volts
  • High voltage transfer to battery power: Switches to battery power as line voltage increases to 265 (220V) / 277 (230V) / 289 (240V) volts or higher. Resets back to line power mode as line voltage decreases to 258 (220V) / 270 (230V) / 282 (240V)
  • Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure by pressing and holding the power on button for longer than 1 second
Certifications & Standards UL (USA), cUL (Canada), CE / IEC 62040, GOST, SASO
Software Included PowerAlert Software
Country of Origin China
Warranty
Limited Warranty 2 Year