Cisco

Data Routers Cisco C8500-20X6C

UGS : 

C8500-20X6C

Network Switches, Cisco Catalyst C8500-20X6C, 10 Gigabit Ethernet / 100 Gigabit Ethernet, 10GBase-X / 100GBase-X, Layer 3, Managed, 20 SFP+ Slots, Rack-mountable, 3U
Les prix n’ont pas pu être mis à jour.
Description
ico-plus ico-minus

The Cisco Catalyst 8500 Series is a rack-mountable, Layer 3 edge platform built on Cisco IOS XE software, designed to serve as a foundation for Software-Defined WAN deployments at aggregation sites. It combines a modular port architecture, broad power input flexibility, and full manageability to give network teams a platform that can scale alongside evolving infrastructure demands.


Key Features:

  • Twelve SFP+ expansion slots deliver 10 Gigabit Ethernet connectivity over Optical Fiber, providing the bandwidth headroom that aggregation-scale deployments require.
  • Layer 3 support enables IP routing directly on the platform, allowing network designers to build scalable, routed topologies without adding separate routing hardware.
  • The modular architecture means interfaces can be populated according to actual port requirements, avoiding over-provisioning from the outset.
  • Compliance with IEEE 802.1Q, IEEE 802.1ag, and IEEE 802.3ah networking standards ensures interoperability with existing infrastructure and supports VLAN segmentation alongside Ethernet OAM capabilities.
  • Redundant power supply support across two power supply bays reduces the risk of a single power-unit failure taking the platform offline.
  • Wide input voltage acceptance, spanning 120 V AC, 230 V AC, -40 V DC, and 72 V, gives the platform flexibility to operate across a range of facility power environments.
  • A compact 1U rack-mountable form factor measuring 1.7" high, 17.5" wide, and 18.5" deep keeps the chassis space-efficient inside standard equipment racks.
  • Full manageability through Cisco IOS XE, including API support, enables automation workflows and zero-touch provisioning at scale.


Within the broader Catalyst 8500 Series, this platform belongs to the Catalyst 8500 Edge Platform tier, which is built around the third-generation Cisco Quantum Flow Processor and is intended for aggregation sites requiring high-performance, services-oriented forwarding.


SD-WAN Foundation with Cisco IOS XE

Running Cisco IOS XE SD-WAN Software, the Catalyst 8500 Edge Platform delivers a cloud-scale SD-WAN capability suited to aggregation deployments. The underlying software architecture is fully programmable and exposes APIs that allow operations teams to automate configuration and policy changes at scale, supporting migration of workloads toward cloud destinations without manual, device-by-device intervention.


10 Gigabit Connectivity Over Optical Fiber

All twelve expansion slots accept SFP+ transceivers operating at 10 Gigabit Ethernet speeds using the 10GBase-X standard over Optical Fiber media. Concentrating high-speed fiber uplinks into a 1U chassis allows aggregation-tier switching and routing functions to be consolidated, reducing the overall number of devices that require management and cabling.


Layer 3 Routing Capability

Layer 3 support means the platform participates directly in IP routing, enabling it to segment traffic across VLANs and route between subnets without requiring a separate upstream router at every aggregation point. Combined with IEEE 802.1Q VLAN tagging, this gives network architects the building blocks for logically separated traffic planes on a single physical device.


Networking Standards for Interoperability and OAM

Support for IEEE 802.1ag and IEEE 802.3ah brings Ethernet Operations, Administration, and Maintenance capabilities to the platform. These standards provide the fault detection and performance monitoring mechanisms needed to verify connectivity end-to-end and isolate faults across multi-segment Ethernet paths.


Flexible Power Input Across AC and DC Sources

The platform accepts input at 120 V AC, 230 V AC, -40 V DC, and 72 V, and operates across a frequency range of 47 Hz to 63 Hz. This breadth of accepted input types means the same platform can be deployed in standard office power environments as well as facilities running DC power distribution, without requiring a different hardware variant. Both power supply bays are active, and a redundant power supply is supported, so a failure of one unit does not interrupt platform operation.


Compact 1U Rack-Mountable Physical Profile

At 1.7" in height, 17.5" in width, and 18.5" in depth, the Catalyst 8500 occupies a single rack unit, preserving valuable rack space for other equipment. The rack-mountable form factor supports standard equipment-room installations and keeps cabling organized within enclosed racks.


Environmental Compliance

The platform is produced in compliance with the Waste Electrical and Electronic Equipment Directive (WEEE), reflecting Cisco's commitment to responsible end-of-life equipment handling.


Markets and Applications

Business

Documents
ico-plus ico-minus